Fixing Cisco VPN Registry Fix Windows 7 Error

Cisco VPN is one of the most advanced VPN protocols on the market, and it comes loaded with a lot of security features.
However, some users reported Error 1058 Windows 10 when trying to VPN on the computer, and today we’re going to cover how to fix Cisco VPN error 1058 Windows 7.

• Many users reported that they can’t connect to the Cisco VPN Error 720 Windows 7.
• You can easily fix this by connecting to a different VPN server location.
• You can also clear your registry to fix the Cisco VPN Error 720 Windows 7.

Run the Cisco VPN Setup

1. Launch the Cisco VPN Client program and navigate to the Help menu.
2. Select About Cisco VPN Client.
3. Choose the Download button.
4. Select Run when the download is complete.
   
5. A window should open. Choose Yes.
6. Follow the instructions of the installer.
   
7. Restart the computer after installation is complete.

Reinstall the Cisco VPN Client

1. Press the Windows Key + X and choose Apps and Features.
2. When the list of apps appears, select Cisco VPN Client.
   
3. Click the Uninstall button.
4. Wait for the removal process to finish.
5. When finished, restart your PC.

Uninstall Cisco VPN Client

1. Press Windows Key + R and enter app. Select Apps from the list.
2. Now locate Cisco VPN Client and click on it.
   
3. Select Uninstall.
4. Follow the instructions on the screen to complete the process.

Change the VPN Client’s port

1. Open the Control Panel, and go to the Programs and Features section.
2. Locate the Cisco VPN client, right-click it, and choose Uninstall.
   
3. When the uninstaller starts, click Yes in the confirmation window.
4. Now, go to the C:WindowsSystem32 directory, right-click on CiscoVPNClient, and choose Properties.
5. Go to the General tab, then click on Compatibility mode, and select Run this program in compatibility mode for.
6. Choose the Windows XP (Service Pack 2) option.
7. Click OK to save the changes.
   
8. Open Task Manager and go to the Processes tab.
9. Locate the Cisco VPN Client process, right-click it and choose End task.
10. Restart your computer.
    
11. After restarting, the Cisco VPN client should start without issues.

Change the VPN Client’s protocol

1. Right-click on the Start button.
2. Select Control Panel.
3. Select Network and Internet.
   
4. Select Network and Sharing Center.
5. Select Change Adapter Settings.
6. Right-click on your current network adapter.
   
7. Select Properties.
8. Go to the Networking tab.
9. Under the Adapter Settings, select Internet Protocol Version 4 (TCP/IPv4).
10. Select Properties.
11. Select the Use the following IP address option.
12. Enter a new IP address for your network adapter.
13. Click OK.