Creating Bootable USB Windows 7 Setup Guide: Step by Step Guide

Are you having problems with creating bootable Windows 7 USB? Here are some troubleshooting tips to help you resolve the setup error creating bootable USB Windows 7.

  • Creating bootable USB Windows 7 setup requires quite a few steps, which this guide is going to take you through.
  • The first step you should take is copying the Windows 7 setup files to a blank USB.
  • The next thing to do is booting your computer from that USB.

Use Diskpart

  1. When the program starts, type list disk.
  2. List disk will display a list of all attached storage devices.
  3. Right-click on a disk and select New simple volume.
  4. Next, type the letter of the partition (C) and click OK.
    Next, type the letter of the partition (C) and click OK.

Check that your USB drive is formated in FAT32

  1. Download Windows 7 USB/DVD Download Tool
    Run the application.
  2. Insert your flash drive into your computer.
    Insert your flash drive into your computer.
  3. Click Create installation media (skip this step if you’re creating a bootable USB drive to install Windows on a different computer).
  4. Select your USB drive as the installation source.
  5. Select the language.
  6. Select the edition.
  7. Click Next.
  8. Select the ISO file to download.
  9. Click Next.

Make sure your USB drive is detected by your computer

  1. Download Windows 7 setup ISO file
    Download Rufus
  2. Open Rufus
  3. Select your USB drive to back up Windows to
  4. Set the default boot priority
  5. Hit the Start button
    Hit the Start button

Perform a Clean Boot

  1. Press Windows Key + R to open Run.
  2. Type msconfig and press Enter.
  3. Click the Services tab, and disable all services.
    Click the Services tab, and disable all services.
  4. Now, go to the Startup tab, and disable all startup programs.
  5. After disabling all startup programs, click OK.
  6. Restart your PC.
    Restart your PC.
  7. Create a Bootable USB
    Download Rufus
  8. Open Rufus
  9. Select your USB drive
  10. Click Start
  11. Select ISO image
    Select ISO image
  12. Click Open
  13. Click Start
  14. Wait until the process is finished
    Wait until the process is finished

Unplug and plug your USB drive

  1. If you haven’t changed your USB Drive, your original device name will appear.
  2. If you have changed it, it will show a new name.
  3. Press the Windows key + E to open File Explorer.
    Press the Windows key + E to open File Explorer.
  4. Open and open the My Computer folder.
  5. Open your USB drive. Verify that it contains the correct files.
  6. Right-click on the USB drive and select Format.
    Right-click on the USB drive and select Format.
  7. Select the NTFS file system and click Start.
  8. Once formatting is complete, restart your computer.
Scroll to Top